Basic Info.
Application
Salvaging, Ship Launching And Ashoring, Cargo Carrying
Certificate
SGS, CCS, BV, Lr, Ukas, ABS, Anab
Function
Lifting and Transport
Product Description
Floating/salvage airbag are widely used in the field of maritime salvage buoyancy aid, such as rescue stranded vessels or help ups didn't ship and soon. Due to the maritime salvage engineering with a sudden and strong timeliness, salvage company if using conventional methods such as lifting, are often subject to large hoisting equipment or take high cost; Using airbags aided process, however, to be convenient and quick finish salvage company.
The airbag for ship lunching or landing is an extremely promising mature technology, it overcomes restrictions of traditional methods, which limitecd by the buliding and repairing capability of small ship facyories, and developed into an extremely flexible technology, which have the advantage of labor - saving, time- saving, economical safe, flexible and a promient economic benefit.
Airbags used in marine launching specifications:
A] Calculated prepare enough rolling the balloon and the balloon and the traction winch, air compressor, etc.Should be subject to no-load inflatable balloon before using detection (inflation pressure is 1.25 times the safe working pressure), found that after the leakage phenomenon should be repaired in use.
B] Arrange the ship after the road, including berth to ramp.Must level off, remove impurities, pay special attention to hard nails on the ground, with a mouth stones must dig clean, prevent punctured balloon, ramps should have enough length and depth in the water.
C] Will all the outstanding Angle on the bottom plate, beauty and stern castings such as burr should be smooth.
D] The traction winch wire rope hull.
E] Close all sea valves, fixed the rudder and propeller.
F] Dismantle all block, fill in the rolling airbags
G] Adjust the gasbag internal pressure, make the bottom down to the appropriate work height, don't touch the ground, keep moving ship process generally small boat desirable between 0.2-0.3m
H] All the airbag should be aimed at hull center respectively, and the vertical direction of water
I] Start the traction winch slowly released cables from hull began to move, when the first a bag from the top bottom immediately after carried to the tail, and put in the book bag planned spacing feeding airbags.
J] Repeat the above process, and gradually move the boat to the water, when not feeding balloon blockade river barred to ship.
K Relocated, inform the staff on board ready, when the condition such as water depth enough, ordered the wire rope or decoupled fast launching ship.If the river is very narrow water fast enough, can use slow winch cable, let the boat slowly into the water.
L Is necessary for some of the larger ships, should install slide device.
M Recycle bag
Packing Details | Woven bags or as per cuotomers' request |
Delivery Detail | Within 15 days after receive the advance payment |
Address:
Dianji Town, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Transportation
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Qingdao LuHang Marine Airbag and Fender Co., Ltd, located in Qingdao, Shandong province, is the largest marine airbag and fender manufacturer in China. In the field of marine fender and airbag, LuHang deserves to be the only one professional manufacturer in China. Since 1988, LuHang has developed in the area of marine and airbag for more than 20 years. Differing from the newly emerging companies in this related industry, LuHang has the most mature technical experience and the most advanced equipments, which is incomparable. LuHang has the largest vulcanizing pot in Asia. In addition, Japanese self-defense forces also employ LuHang marine rubber fender for years. Products from LuHang are used all over the world. Quality is always the key to our 27 years′ survival throughout our production history. LuHang dares to declare that we are the best choice for you!